Nissan Murano Z50/Ключ-брелок

Материал из NissanWiki

Версия 05:42, 15 января 2013

To reprogram your key fob (keyless entry remote)
1.Get in & lock the doors
2.Insert the key into the ignition 20 times within 15 seconds (or until the Hazard lights flash)
3.Hazard lights should flash
4.Put key back into the ignition & turn to Accessory
5.Press the master door lock (on drivers door arm rest) unlock/lock
6.Hit the lock button on the remote
7.Hazards should flash
8.Pull key out and open the drivers door and then close it 
9.It should be set


--

Hop in and lock the doors with the door switch
Insert the key in and out once per second until you see the hazards flash. 
Then after hazards have flashed, insert key and turn to on position.
Once everythings lit up, press any button on your remote
The hazard lights should blink indicating it took the programming

Then if you have any additional remotes you wish to program

While ignition is still on, press the unlock then lock buttons on the door switch
Then press any button on the second remote

If you have more remotes, repeat above steps.

Once your done, shut off key and pull it out
Manually open door and done.